NetOps Toolkit

Broadcast / AoIP

StudioHub Pinouts

StudioHub+ AA wiring — RJ-45 pinout & adapter guide (XLRM/F, TRS, RCA, Pigtail)

About StudioHub+

StudioHub+ (now Angry Audio) is a broadcast audio wiring standard using shielded Cat5e/Cat6 STP cable and RJ-45 connectors to carry balanced stereo audio throughout a facility. Wiring follows the T568B color standard, compatible with standard Ethernet patch panels and keystone jacks. Pin 4 and the cable shield serve as the common audio ground.

Pins 7 & 8 carry optional ±15V DC when used with StudioHub+ powered Cubes or Hubs. Do NOT connect to Ethernet switches.

StudioHub+ “Plus” Pinout (T568B — Current Standard)

PinColor PairSignalDescription
1 Wht/Org L+ / AES+ Left Ch. Positive / AES/EBU Positive
2 Org/Wht L− / AES− Left Ch. Negative / AES/EBU Negative
3 Wht/Grn R+ Right Channel Positive
4 Blu/Wht GND Signal Ground
5 Wht/Blu NC Not Connected (spare)
6 Grn/Wht R− Right Channel Negative
7 Wht/Brn −15V DC Negative DC Power (optional via Hub)
8 Brn/Wht +15V DC Positive DC Power (optional via Hub)

StudioHub “Classic” Pinout (Legacy)

PinColor PairSignalDescription
1 Wht/Org GND Signal Ground
2 Org/Wht + Positive Signal
3 Wht/Grn − Negative Signal
4 Blu/Wht NC Not Connected
5 Wht/Blu L+ Left Channel Positive
6 Grn/Wht NC Not Connected
7 Wht/Brn R+ Right Channel Positive
8 Brn/Wht NC Not Connected
Classic is legacy. Use Plus for new installs. Adapters are NOT cross-compatible between Classic and Plus.

Adapter Band Color Convention

Green Band
Left Channel / AES/EBU
Red Band
Right Channel (Stereo R)
Stereo / No Band
Mini / Pigtail carry both channels
Orientation
RJ-45 Female onto patch cable; audio connector faces the gear

ADAPT-XLRM / ADAPT-XLRF Green Band (Left/AES)

XLR Male or Female — Left / Mono Balanced

RJ-45 Pin Adapter Connector Function
Pin 1 (L+/AES+) XLR Pin 2 Signal +
Pin 2 (L−/AES−) XLR Pin 3 Signal −
Pin 4 + Shield XLR Pin 1 Ground

ADAPT-XLRM / ADAPT-XLRF Red Band (Right)

XLR Male or Female — Right Channel Balanced

RJ-45 Pin Adapter Connector Function
Pin 3 (R+) XLR Pin 2 Signal +
Pin 6 (R−) XLR Pin 3 Signal −
Pin 4 + Shield XLR Pin 1 Ground

ADAPT-TRS Green Band (Left)

1/4″ or 1/8″ TRS — Left / Mono Balanced

RJ-45 Pin Adapter Connector Function
Pin 1 (L+) Tip Signal +
Pin 2 (L−) Ring Signal −
Pin 4 + Shield Sleeve Ground

ADAPT-TRS Red Band (Right)

1/4″ or 1/8″ TRS — Right Channel Balanced

RJ-45 Pin Adapter Connector Function
Pin 3 (R+) Tip Signal +
Pin 6 (R−) Ring Signal −
Pin 4 + Shield Sleeve Ground

ADAPT-RCA Green Band (Left)

RCA / Phono — Left / Mono Unbalanced

RJ-45 Pin Adapter Connector Function
Pin 1 (L+) Center Pin Signal +
Pin 4 + Shield Outer Shell Ground/Shield

ADAPT-RCA Red Band (Right)

RCA / Phono — Right Channel Unbalanced

RJ-45 Pin Adapter Connector Function
Pin 3 (R+) Center Pin Signal +
Pin 4 + Shield Outer Shell Ground/Shield

ADAPT-MINI / ADAPT-MINIUNBAL Stereo (both channels)

1/8″ Stereo TRS — Left + Right Unbalanced

RJ-45 Pin Adapter Connector Function
Pin 1 (L+) Tip Left Channel
Pin 3 (R+) Ring Right Channel
Pin 4 + Shield Sleeve Ground

ADAPT-PIGTAIL Green Band (Left)

Bare Wire Pigtail — Left / Mono Balanced

RJ-45 Pin Adapter Connector Function
Pin 1 (L+) Red Wire Signal +
Pin 2 (L−) Black Wire Signal −
Pin 4 + Shield Bare/Shield Wire Ground

Wiring Notes

TopicDetail
Cable Type Shielded Cat5e or Cat6 STP required — unshielded UTP not recommended for audio
Max Length Up to ~300 ft (90m) for analog; shorter recommended for AES/EBU digital
AES/EBU Digital Uses Pins 1 & 2 (same pair as Left analog). 110Ω impedance. Green Band adapters.
Ground (Pin 4) Pin 4 and cable shield are bonded as audio GND inside all standard adapters
DC Power Pins 7 (+15V) and 8 (−15V) only active on StudioHub+ powered Cubes/Hubs
Compatibility Works with Axia (Telos Alliance), Wheatstone, and all StudioHub+ equipped gear
Patch Panels Standard 110-block or keystone patch panels work; punch down to T568B